VESTAMID PA12
Evonik Degussa Vestamid L1670
Evonik Degussa Vestamid L1833
Evonik Degussa Vestamid L1930
Evonik Degussa Vestamid L1940
Description
VESTAMID L1670 has been developed especially for the extrusion of thin wire insulations and cable jacketings.VESTAMID L1670 coatings exhibit a low coefficient of friction which facilitates the laying of cable.Switchboard wiring isolated with VESTAMID L1670 can be soldered with no worry of interference by the plastic resin. The wiring can be soldered without the need to strip the isolating layer. Jacketing of VESTAMID L1670 protects buried cables from attack by termites.
VESTAMID L1833 is a 23% glass fiber-reinforced, easily demoldable and heat-stabilized polyamide 12 compound.it is Medium-viscosity, heat-stabilized, glass fiber-reinforced compound based on Nylon 12. Due to its mold release properties, VESTAMID L1833 is suitable for the efficient production of injection molded parts with short cycle times. Further advantages of VESTAMID L1833 are the characteristic properties of polyamide 12 as low water absorption, good dimensional stability and almost the same properties at changing ambient humidity.
VESTAMID L1930 is a heat stabilized, with 30% milled glass fiber-reinforced PA 12 compound suitable for injection molding of stiff, relatively warp free molded parts.Milled glass fiber filled PA 12-Plastic resin for the injection molding. Due to the reinforcement moldings from this compound exhibit a high strength and rigidity. Because PA 12 absorbs only little water, the parts have a good dimensional stability and almost unaffected mechanical properties at changing ambient humidity.
Due to the reinforcement the shrinking of moldings is decreased compared with unreinforced compounds. Using specialty short glass fibers for the reinforcement of VESTAMID L1930 the difference between longitudinal and transverse shrinkage relating to the flow direction of the melt is significantly lower than with common glass fiber-reinforced products. Therefore especially low-warpage precision parts can be molded.
VESTAMID L1940 is a heat-stabilized polyamide 12 compound for injection molding and for the extrusion wire insulation.
VESTAMID stands for an entire range of polyamides with custom tailored properties.
VESTAMID obtains the desired characteristics in the materials by chemical modification of the base polymer, or physical modification-by incorporation of glass fibers, Teflon, or graphite, for example-or a combination of both. In this way Evonik is able to meet virtually any customer requirement with an extremely wide range of VESTAMID grades.
Properties of compounds based on VESTAMID PA12 vary little with changing humidity due to low moisture absorption. Parts made of this semi-crystalline material are characterized by exceptional impact strength, low coefficient of friction and good chemical resistance.
VESTAMID has proven its worth in a number of application fields over many years and its many variants are used mainly for durable and technically sophisticated applications.
if need this material, pls inform your needed type/color/order quantity so that we can offer you the best price accordingly.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.