Minlon is a grade of mineral and mineral/glass reinforced nylon resins.These compositions are reinforced - not filled.The chemical bond between the nylon and the mineral reinforcement enhances the tensile properties and stiffness of the resins. Due to their excellent balance of properties, components of Minlon (produced by injection moulding) find extensive use in many applications including: automotive, electrical, electronic, domestic appliances and construction.
Even for the most demanding under-hood applications, Minlon grades featuring a specially developed glass and mineral combination and a nylon 6,6 matrix provide the ultimate combination of strength, stiffness and creep resistance at elevated temperatures, combined with precision molding and low warpage are additional benefits provided by Minlon.
Minlon resins offer:
Minlon nylon resins are solid granular materials,typically cylinder cut with nominal dimensions of 3 × 2,5 mm. Most compositions are available in colours,either cube blended or fully compounded.
Minlon nylon resins are supplied in moisture proof packaging, so that drying should not normally be necessary.However, nylon resins are hygroscopic and absorb moisture on exposure to the atmosphere.If excessive moisture absorption has occurred, then the resin must be dried at 80°C to less than 0,2% moisture content before processing.These products can be processed on conventional injection moulding equipment.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.