Solvay Hyflon MFA 1041
Solvay Hyflon MFA F1540
Solvay Hyflon MFA D 5510 F
Hyflon MFA are semi-crystalline, fully-fluorinated, melt-processable fluoropolymers. All Hyflon fluoropolymers are classified according to ATDM D3370 standards. They have the highest thermal properties and exhibit the greatest chemical resistance of all commercial, melt-processable fluoropolymers.Based upon their melting points, this family of products is divided into three series. These materials offer customized performance to meet specific efficiency and processing requirements. They are available in pellets, powders and dispersions.
Hyflon MFA offer a unique set of properties to meet extreme performance requirements, including Very cold temperature resistance, inherent flame resistance, chemical inertness, low surface energy, exceptional dielectric properties and excellent mechanical characteristics.
Sophisticated control and sensing systems have stringent demands for their cabling which only fluoropolymers can deliver. For applications such as automotive push-pull cables.
Hyflon MFA offer their high purity, chemically-inertness and fire-resistance to CPI applications including, high purity coatings, protective linings and fluid & gas handling applications.
Hyflon MFA F can be widely used in the chemical process industry due to its virtually universal chemical resistance up to 220-230°C. Specific applications include protective linings of tanks, reactors and heat exchangers, tower packing and applications where FEP is also used. The surface of Hyflon MFA is up to 10 times smoother than standard PFA improving cleanliness, reducing pressure drop and reducing wall build-up in slurries or mixtures.
Hyflon MFA powders are designed for electrostatic spray coating. They are particularly recommended for use as a topcoat in non-stick applications, including release coatings for bakeware.
Hyflon MFA innovative and customized films and resins are used in the realization of flexible frontsheets thanks to their outstanding properties.
Wherever higher temperatures are required for applications in extreme environments, Hyflon MFA are the right materials, offering thermal resistance up to 260°C, barrier properties and inertness to the most aggressive chemicals. Applications include: sheet lining; extruded liners; dual laminates; electromechanical cable jacketing; umbilicals; cryogenics.
Hyflon MFA resins are used to replace FEP in such applications as automotive wiring, heater cables, coaxial cables and down hole cables. Hyflon MFA F has excellent thermal stress crack resistance and good mechanical properties allow it to be used continuously up to 225°C. Hyflon MFA 1041 is widely used for high speed extrusion of insulation for plenum rated LAN cables, thin walled coaxial cables and consumer electronics.
We can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.